A loving little origami handicraft, fold a ring with a big love heart. You can wear it yourself and play with it, or you can give it to the person you like for romance~ There are not many steps, so friends who like it can learn from it. ~
Prepare a rectangular piece of paper, 1/2 of the width is the width of the heart shape of the ring.
Fold upward to make quarter lines.
Align the lower two corners with the center line.
Expand again to get the crease.
Fold the long edge of the right side toward the center line.
Open the lower part along the crease made in the previous step and press it flat.
The same process is done on the left side to obtain a heart-shaped plane.
Turn over.
Fold the crease as shown in the picture.
Fold the long strip in half along the crease and pinch it up.
Fold the long strip to the left.
Fold the upper layer down in half.
The rightmost connection is flattened into a triangle.
Flip the upper layer of the strip downward as shown.
Fold the long strip to our right along the crease.
Fold the upper layer down in half as in step 9.
Fold the part turned out in step 10 upward.
Roll up the strip.
And insert the end into the newly folded sandwich to serve as a ring. If the paper is too long, you can remove a small section from the end of the strip according to the thickness of your finger.
Fold the single layer of paper on the ring into the inside of the ring.
The final triangular part is also inserted and fixed.
Fold out the two arcs on the top of the heart shape.
The origami with love ring is completed~
