It took three days to design and make a three-dimensional paper sculpture of a Christmas snowman. The cardboard was printed using a printing machine at home. Although there are some deviations in the color, the appearance is still very good-looking and cute.
Let’s take a look at the photo first. Here is the predicted plan drawing, which looks very cute.
This is divided into ten parts, and the height of the finished product is ten A few centimeters, and there is nothing special about the production.
After printing , cut it directly along the black solid line, try to follow the inside of the line, so that the black line will disappear.
< p style="text-align:center;">The work looks beautiful, and the dotted line is where it needs to be cut.
< /p>
There are currently dotted linesIt is the place that needs to be cut. The dotted line includes the two buttons on the belly, the mouth, the nose, and the hat ball.
At the same time, you also need to draw the tenon part on each piece , just use black and white printing on the first side, and the colors are concentrated on the second side, and then print directly on the line to print solid lines.
When cutting, you must cut along the outline and do not completely cut the parts and the body.