Origami pays attention to symmetry and requires patience. During the origami process, you can Exercise childrens symmetry, patience and concentration. Origami requires a certain sense of space, which can cultivate childrens three-dimensional sense. Origami can fold many items, and you can draw inferences from one instance to other cases. If you can fold an airplane, you can fold a spaceship. It can cultivate childrens creativity. Today, the editor will teach you how to fold a super cool tank and armored vehicle. Use A4 printing paper to fold it. Pay attention, attention, attention! Be careful not to make it a square!
Materials and tools required for production:
Printing paper.
Handmade DIY steps:
Step 1:
This is the finished product. It doesn’t look very good. If you are interested, please come and learn!
Step 2:
Prepare the printing paper, and be careful not to cut out squares! Because I was used to it in the previous tutorials, the first step was always to cut out a square, but this time it was different.
Step 3:
Roll it into a tube, making sure one end touches the other.
Step 4:
Flat.
Step 5:
Cut this piece out.
Step 6:
Fold the remaining piece in half edge to edge, making sure it is evenly folded.
Step 7:
After folding, open the two sides and fold them toward the crease you just made.
Step 8:
Turn it over and fold this corner toward this edge.
Step 9:
Fold up the excess corners.
Step 10:
Repeat the steps in one direction.
Step 11:
Turn over and fold upward at the midpoint of the two creases, making sure the two sides are aligned.
Step 12:
Turn over this side and put it away.
Step 13:
Flat.
Step 14:
Fold this corner of this edge toward the vertex.
Step 15:
Same on both sides.
Step 16:
Fold the bottom corner toward the end point, pressing only the middle part.
Step 17:
Turn over and look at this middle crease.
Step 18:
Fold the following edge toward that crease.
Step 19:
Open it the other way around.
Step 20:
Take this rectangle and fold it corner to corner.
Step 21:
Fold these two creases.
Step 22:
Along the crease we gather it.
Step 23:
The harvest is like this.
Step 24:
Fold one side of this rectangle toward the center line.
Step 25:
Same on both sides.
Step 26:
Open it and fold this edge once, thinking about the crease you just made.
Step 27:
Same on both sides.
Step 28:
Fold this mark on this edge again.
Step 29:
Same on both sides.
Step 30:
Start plugging here.
Step 31:
Insert it, here is the barrel of the tank.
Step 32:
Fold this edge toward the center line.
Step 33:
Fold this edge back again.
Step 34:
Same on both sides.
Step 35:
This one becomes this side and bends over.
Step 36:
Tuck this corner in here.
Step 37:
Same on both sidesSample.
Step 38:
This part of the wheel is spread out from here.
Step 39:
Work hard to open it up.
Step 40:
Work hard to hold it up, and our tank will be completed.
Step 41:
You can also take a few more pieces of paper, roll up a small cannon barrel, and stuff it into the cannon barrel to make it more stylish.