Illustration of how to make a glider model using cardboard
People all have the dream of flying freely in the sky, and gliders can help people realize this dream. Although they cannot make complicated gliders, children can fold them A paper glider model can be made entirely out of cardboard, and the gliding effect is very good.
< img alt="Illustration of how to use cardboard to make a glider model" border="0" src="https://img.111diy.com/timthumb.php?src=/d/file/20220216/5ca2dgurzy4.jpg"/>
< img alt="Illustration of how to use cardboard to make a glider model" border="0" src="https://img.111diy.com/timthumb.php?src=/d/file/20220216/ggqewienskw.jpg"/>
Fold the cardboard together and thenDraw the fuselage according to the drawing, then cut it out, fold it according to the markings on the drawing, and then paste it with glue to reinforce it. Cut out a few strips of paper to serve as the fixation and counterweight of the aircraft. The areas that require counterweight include: Strengthening the top and root of the wing, the top of the horizontal tail, the root of the vertical tail and both sides of the fuselage is a very important step. It mainly involves cutting two slits on the back of the paper strip, then folding it down and gluing it directly. On the fuselage.
After the reinforcement is completed, pay attention to adjusting the wings and trimming out the beautiful streamlines on the nose. Then start making the counterweight, cut a part of the bottom of the nose, and use cardboard to cut the paper tube. Roll it up and put it directly on the nose of the aircraft. Pay attention to check whether the center is in the center of the wing.
