Home > Origami > Easy origami

Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Everyone yearns to fly, so there has been the myth of Chang'e flying to the moon since ancient times. Now there are airplanes that can fulfill human beings' dream of flying. Do students also want airplanes? Let’s take a look at the illustrated tutorial on how to fold a glider! A glider has a long, narrow wing that is significantly different from an airplane, and the fuselage has a slender, streamlined shape.

I drew the drawings of this glider myself. It was actually measured that the glider slid about 18 meters from the 2nd floor [Breeze]. When flying on the 6th floor, I was afraid that it would not be able to be recovered, so I adjusted the tail to one side and let it circle. , the flight radius is between 15-20M, leaving more than 1 and a half minutes!

Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Illustrated tutorial on how to fold a glider:

Step 1. Fold a piece of A4 paper in half, and then draw a drawing according to the picture on the folded part
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 2. Use a utility knife to carve it out
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 3. Fold according to the fold line above and glue it in place
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 4. Then cut out a number of cardboard strips to make aircraft reinforcement ribs and counterweights:
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

The locations where counterweights need to be added are: above the wing, at the root of the wing, above the horizontal tail, at the root of the vertical tail, and on both sides of the fuselage.

Step 5. The picture below shows one of the reinforcing ribs above the wing. Cut 2 slits behind the reinforcing ribs, fold them down, and glue them to the fuselage.
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Drawings for making a glider. Illustrated tutorial on how to fold a glider. Juqiao.com

Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 6. After everything is glued, adjust the position of the wings and trim the streamlined shape of the nose.
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 7. Look pretty~~ It’s not over yet. Make the counterweight below, and cut off a part of the bottom of the nose [which is where the metal rod points]
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Step 8. Use cardboard to roll a paper tube of suitable size and put it on. While inserting, check whether the center is at the center of the wing.
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Drawings for making a glider. Illustrated tutorial on how to fold a glider.

The glider is finished. Below is the wind tunnel test diagram of the glider. Act quickly!
Drawings for making a glider. Illustrated tutorial on how to fold a glider.

Extended reading:

1. Space shuttle origami tutorial

2. Illustrated tutorial on hand-made origami invisible aircraft

3. How to fold a jet fighter. Let’s fold a jet aircraft

4. Simple origami fighter folding steps

5. Jet fighter origami tutorial teaches you how to fold a jet aircraft