Simple origami tutorial for 3D chair

Today we are going to fold a small chair. The material used is a small square piece of paper. The folding method of the chair is very simple. It is the basisOrigami. The editor has folded a lot of origami furniture like this before, including beds, drawers, sofas, etc. Children who are interested can check it out. Now lets take a look at how this simple little chair is folded.

Step 1. Fold the four sides of a small square piece of paper with a side length of 7.5 cm in half, and then unfold it to leave a crease.

Step 2: Fold the two opposite sides toward the middle crease, making both sides coincide with the crease.

Step 3. Expand the upper side as shown in the picture.

Step 4. Fold the left side along the middle crease to the right side, so that the two sides overlap.

Step 5: Fold the upper and lower corners of the left side toward the nearest crease to form two small triangles.

Step 6: Expand the two small triangles and stand the top edge up along the nearest crease.

Step 7: Open the upright part and fold the upper left corner along the creases on both sides.

In step 8, do the same in the lower left corner to get this graphic.

Step 9: Fold the folded parts on the right sides to the left along the inner middle folded edge.

Step 10: Fold the upper and lower edges inward about 90 degrees along the nearest crease.

Step 11: Stand the stacked parts on the left middle at about 90 degrees.

Step 12. Turn the folded part over and place it properly. This is a simple chair. Isn’t it very simple? It only takes a few steps to fold. Children, hurry up and give it a try and see who can fold it more beautifully!