Basic tutorial on three-dimensional cards [7]: Tutorial on making three-dimensional letter cards

Basic tutorial on three-dimensional cards [7]: Tutorial on making three-dimensional letter cards

If you have learned the first lesson of the three-dimensional card production tutorial: Three-dimensional Card Basic Tutorial [1] Frame Structure, this production tutorial will be very simple for you! If you haven’t learned it yet, go check it out!

This three-dimensional card style has a row of standing letters in the center of the card. As taught in Lesson 1, the letters are erected on a square frame!

First print or hand-draw the sketch.

Cut the gray lines without cutting along the edges of the letters (black and blue lines). Green lines represent peak marks, while red lines represent valley marks. Using your finger, carefully press the back of the letter so that it bulges out along the green, just like you made in lesson one. When finished you should see half of the letters appear in front of the frame and half appear above the frame.

Now start cutting along the letters (blue and black lines) until the entire letter is hollowed out.

In fact, you can decide whether the gray lines exist or not, which mainly makes the production easier.

Look at some good examples

The whole card cleverly adds a blue band at the top.

More three-dimensional letter card works!

Decorate however you like!