Origami Snowflake Drawing Tutorial

However, it should be noted that although this origami tutorial is about making origami snowflakes, the final effect can only be seen after the origami model is finally unfolded, which is similar to the tutorialMagic Origami Square Transformation into an origami roseIf there is no final unfolding operation, it is difficult to tell that what we are folding is an origami rose, and this tutorial can also surprise people when it is finally presented.

Here is a simple illustration of the origami operation in the illustration to facilitate the origami operation: 1. First make the crease as shown in the picture. You can see that the dotted line is the valley mark, and the dotted line is the valley mark. The dotted lines are peak marks. If there are creases to assist folding, it will be more convenient when making origami snowflakes; 2. At this time, fold the dotted line creases as shown in the figure; 3. The third picture shows is the frontWhat it looks like after folding in one step and enlarging it; 4. Fold the quadrilateral formed after the previous folding step from the wide bottom corner to the other side; 5. Then flatten it and flatten it, and we will get the rhombus structure as shown in the picture; 6. When all the triangles have completed the same folding, you will get the style as shown in the picture. Turn the model over; 7. At this time, the origami model is as shown in the picture, and you can see that there are a lot of creases in it. The creases on the corners are all peak marks. Fold all the corners inward and follow the creases; 8. At this time, fold the corners pointed by the black arrow inward according to the creases; 9. Turn the corner pointed by the black arrow in, and fold the remaining 11 corners in the same way; 10. At this time, you will get the origami model as shown in the picture; 11. Flip the origami model, and then fold the black arrows Fold the corners of the first step outwards, that is, fold them in the style of the origami illustration, and fold the remaining five corners in the same way; 12. Flip the resulting origami model.

13. Gently open the structure framed by the dotted box to both sides; 14. At this time, enlarge the partial folding operation to make it easier to control. Pull the two corners indicated by the black arrows from the back of the origami model to the front; 14. Fold the remaining five corners in the same way; 15. What needs to be operated at this time is the dotted circle The circled area is therefore deliberately enlarged in the next illustration; 16. Now there are 4 folding arrows in the origami illustration. Follow the instructions of the arrows to fold the upper and lower structures of the origami model to both sides at the same time; 17. After folding in this way The three-dimensional structure of the origami model will be unfolded to obtain the origami style as shown in the picture. The three-dimensional origami snowflake we are pursuing is also shown here; 18. The final origami snowflake is as shown in the picture, very So domineering!