3D origami heart simple illustration

3D origami heart, this is a moderately difficult origami heart tutorial. If you want to learn 3D origami heart, then follow our 3D origami heart illustrations to learn how to fold it!

Steps:

A. This is The front side of the paper.
B. This is The back of the paper is the same color as the front.
1. Put the paper Fold in half horizontally.
2. Expand.
3. Vertical folding .
4. Expand.
5. Fold diagonally.
6. Expand.
7. Diagonal fold.
8. Expand.
9. Half of the valley is folded in half.
Fold the bottom half in half.
10. Next Fold the half in half.
Expand both folds.
11. Before expansion Two folds.
Fold the left half in half.
Fold the right half in half.
12. Complete here A valley fold then unfolds.
13. The light gray line represents the crease line.
The valley fold is completed here.
14. Expand.
15. Put the paper Rotate 90 degrees counterclockwise.
16. Put the paper Rotate 90 degrees counterclockwise.
17. Put the paper Rotate 45 degrees.
18. Folding.
19. Expand.
20. Put the paper Rotate 180 degrees.
21. Rotate the paper 180 degrees.
Fold it.
22. Expand.
23. Now, You have 14 crease lines.
Rotate the paper 90 degrees.
24. On paper Complete the following crease pattern.
25. You should The heart-shaped model shown on the left can be obtained.
Look at the side.
26. In step 27, the region (1) enclosed by the dashed ellipse is first processed.
Then process area (2) in step 28.
27. A Valley fold.
Make sure the valley vertex is at 1/6 of the width marked 1.
28. Work on the dotted elliptical area.
We will do the same thing on the right edge as we did on the left edge.
29. Clockwise Rotate 90 degrees.
30. Flatten The area enclosed by a dashed ellipse.
31. Follow the steps 30 Flatten the area.
Collapse.
32. Finishing .
33. Try to make Symmetrical on both sides.
34. Also close lower side.
35. Open the top (dashed ellipse).
36. Two valley folds.
37. Close again it.
38. And Sharp edges.
Valley and mountain folds are done here to smooth out the sharp edges.
39. We just Finished left side.
40. Right Repeat steps 26-39 on both sides.
41. Pull sideways in the opposite direction.
42. Place your fingers Reach into the model and flatten the surface.
43. The top is also smooth.
44. If you don’t want to put anything in it, you can stop here.
45. Close Before the bottom, we can put something inside, like a ring, chocolate or anything.
46. Above Apply glue.
47. The bottom is still opened.
48. Or us You can fill it with cotton balls (or paper towels) so that the surface inside will automatically smooth out.
If you want to put rings, chocolates, etc., you can use cotton balls to hold it together.
49. Heart surface smooth.
50. If you Once you're happy with the shape, you can seal the bottom with glue.
51. Alright!
The 3D origami heart is now completed.