Illustrated tutorial on the simple method of origami wallet for children

Learn how to make a simple origami wallet to store business cards or Credit Card! This is an easy to follow step-by-step tutorial.

This origami wallet has a total of 4 pockets for storing cards, one pocket on the front, back and inside, and two pockets on each side.

You will need to prepare a square piece of paper, please use at least 20 x 20 cm.

You don't need to prepare any glue, but using some at the end can make the wallet safer and stronger.

1. First fold the paper in half from left to right.

2. Unfold the paper.

3. Flip the paper from left to right to the other side.

4. Fold the right edge to the left. If you are using it to hold business cards, use a business card as a reference and place it with a gap on each side. Same goes for credit cards.

5. Turn the paper over to the other side.

6. Fold the left edge to the right.

7. Open it as shown in the picture.

8. Fold the left and right edges inward a little, this will help prevent the paper from tearing.

9. Fold all four corners so they are diagonal to the two vertical creases.

10. Refold the left and right parts.

11. As shown in the picture after completion.

12. Flip the paper from left to right.

13. You can fold the bottom up over the top to make a tiny pinch mark on the left side.

14. Fold the bottom edge up a little, about 2mm beyond the pinch mark.

15. Likewise, fold the top edge down.

16. Then fold the paper in half from left to right.