Dollar Origami Shirt Making Tutorial

Actually, this origami tutorial is part of the dollar origami. As long as you can get a standard-sized dollar, you can successfully complete this origami. But if you don’t have one, it doesn’t matter. Cutting a piece of paper according to the size has the same effect. The effect. The size of other coins may not work, because the U.S. dollar is longer and thinner than other coins. The general size is 6.14 inches long and 2.61 inches wide (1 inch equals 2.54 centimeters). Of course, if you don’t know anything about origami T-shirts themselves If required, you can follow this simple tutorial to try making: Origami shirt and tie (card ornaments), the effect is also quite good!

1. First of all, prepare a long rectangular piece of paper. The recommended size is about 15.5×6.5cm. Try not to deviate too much. You can enlarge it in the same proportion, but make sure the paper has a large length-to-width ratio. If you want to make a satisfactory origami work, you need to fold it several times to adjust the length and width of the paper. Fold the rectangular paper in half and then open it. Form the crease at the dotted line in the first picture.

2. Fold both corners of one side to the position of the crease you just made. This step is very similar to the steps of an origami airplane. After that, fold the triangle formed by folding down.

3. Find a ruler and a pencil, and draw traces on the folded triangle as in the picture. This will be the look of the tie in your final work. The size can be determined according to your preference.Certainly.

4. Open the paper one step and place it as shown in the picture. Make a crease on the triangle part according to the line drawn earlier. Try to make the crease as clear as possible, and try not to fold it above the bottom edge of the triangle.