Simple handmade origami lobster origami complete illustrated tutorial

Simple handmade origami lobster origami complete illustrated tutorial

Origami Shrimp making tutorials have long been relatively rare in origami illustrations, and are more common in CP origami. Moreover, the production of these origami lobsters is usually relatively difficult. For ordinary origami enthusiasts or handicraft enthusiasts, making them is time-consuming and laborious. In the end, it takes a lot of time and may not be completed well. , and many people often end up with folding failure. Therefore, the simple, interesting, but very vivid origami lobster tutorial is particularly important.

Compared with those complicated origami lobster tutorials, this origami lobster tutorial is much simpler and meets the requirements of Origami Encyclopedia of Illustrated Origami. The entire process is less than ten steps, and this kind of origami production allows people to take a little time to complete the production after busy work, which can be said to be full of "benefit". The final origami lobster itself looks similar to a real lobster in both appearance and structure. This unique handmade origami production is very suitable for friends who don’t have time but want to relax with origami. Of course, it is important to note that this hand-made origami lobster needs the assistance of scissors to successfully complete the production, so if you really mind scissors, you may want to say goodbye to this origami lobster tutorial.

---

1. The first paper used is square paper, which is the same as the production of many other origami animals in the origami encyclopedia illustrations. Fold the paper diagonally, and then unfold the paper. This will leave creases on the diagonal. Then cut the paper along both sides of the diagonal with scissors, as shown in the picture. It should be noted that the uncut corner is the corner where the diagonal itself lies, so pay special attention to this.

---

2. Then take the cut left and right corners forward and fold the creases left when folding diagonally, that is, fold as shown in the picture. After the folding is complete, we flatten the paper.

---

3. Based on the folding in the previous step, continue to fold the two new corners formed after folding toward the middle crease, that is, perform continuous inward folding as shown in the picture. When finished, flatten the paper. At this time, the middle part of the origami model is relatively thick.

---

4. Then fold the triangular structure at the lower part of the origami model into four sets of compression folds, as shown in the picture. It can be seen that such folding makes the origami model itself more layered. This sense of layering is exactly what the origami lobster body itself should reflect.

---

5. At this time, fold the origami model in half, that is, perform the folding operation as shown in the picture. At this time, because we have already performed some related folding work in the previous step, the origami model itself will have a certain angle. At this time, we should also take the initiative to make some adjustments to this angle to make it look more like a lobster, rather than a simple stack.

---

6. At this time, fold the two paper strips cut in the first step upwards. You can see that such a fold makes the origami model look like an origami lobster. This is definitely a good idea. phenomenon, at leastYou're as close as you can get to an origami lobster.

---

7. Finally, the most important operation that can bring life to this origami model is the plastic surgery. After sufficient shaping, we now see the folded three-dimensional origami lobster. The overall effect is quite good. And it was completed in less than ten steps. Although the previous Origami Owl is a little more complicated than this, at least it is still in ten steps, so if you want to try it, there is no problem.