Origami airplane tutorial: giant rat origami airplane diagram and folding method

Origami airplane tutorial: giant rat origami airplane diagram and folding method

There are many ways to fold origami airplanes. Each origami airplane folding method produces different origami airplane effects. Some origami airplanes are more suitable for Flying, because when you throw it into the air, you will find that its flying ability is very strong and it can stay in the air for a long time without falling. Some origami airplanes are more suitable for viewing. These types of origami airplanes are usually made of tibia joints, so from an aerodynamic point of view they are not suitable for flying in the air, and handmade origami airplanes often cannot control the center of gravity or other important structural structure. But today’s origami giant rat plane is quite easy to fly.

< br />

Compared with the origami fighter plane made by How to fold the Cobra Cruiser origami plane, this origami giant rats origami plane looks more majestic in configuration, but its flying ability is definitely remarkable. behind the latter. But this is also the characteristic of the giant rat origami airplane, that is, the structure is more focused on the front and rear ends of the airplane. It can be seen that this giant rat origami airplane has a sunken structure at the front end and a raised structure at the rear end. This structure is suitable for flying the origami airplane from a relatively high place to obtain an excellent Glide effect. Tutorial images from funkidideas. However, you still need to try it yourself and continue to improve the functions of the origami airplane.

---

1. The paper required to make this origami airplane is rectangular paper. You can fold the square paper in half first, then unfold it and cut off half of the paper for use. Then fold the rectangular paper in half along the long side, as shown in the picture.

---

2. After folding in half, unfold the paper. At this time, we will obtain a paper structure with a middle crease as shown in the picture. Then fold the top left corner of the paper structure toward the middle crease of the paper structure, that is, perform the folding operation as shown in the picture. After completing the folding, flatten theorigami model.

< /p>