During the current stage of the coronavirus pandemic, vacations have become longer and people are not allowed to go out. It’s sad to stay at home all day with nothing to do! So at this stage, I DIYed a lot of equipment at home, nearly ten types.
I have already shared part of it with you in the previous post, and this time I will share some of the results with you.
1. The ultimate simple and multi-functional sub-line ruler.
The prerequisite for using this sub-thread ruler is that you must be able to use the hook tying device below to tie the hook. If you don’t know how, hurry up and learn it! I have posted a special short video.
Making materials:
1. A piece of wood. 2. Nails. 3. Tools. 4. Bubble.
Production process:
1. Use a long wooden board (I used floor wood) and mark it according to the length of the sub-lines.
What needs to be noted here is that you need to subtract about 8 cm from each scale. For example, the length of the sub-wire you want to tie is 30 cm, then you can only mark "30 cm" at 22 cm on the board. why. Because we need to add the circle around the hook tying device, which is about 8 cm.
Also, in order to make it easier to hook the fish hook, I glued a piece of foam on the top of the board. In fact, you can also do it without sticking it.
In fact, if the sub-threads you tie are not knotted, the sub-thread ruler is already completed. It’s easy!
If you need to tie a knot, continue to make the hook distance.
Cut a middle section off one side of the board and sand it smooth.
Determine the hook distance and drill holes on the same straight line.
Nail in and apply some 502 glue to fix it. The production process is quite simple. Simplicity is simplicity, and ease of use is the key. Now I will share with you how to use it. It is absolutely easy to use.
1. First tie the first hook of the sub-thread casually, and then hook the hook on the foam.
2. When tying another hook, as shown below: In the natural state of the fishing line (cannot be pulled), align the starting part of the hook with the length of the sub-line you want.
3. Then tie the hook normally.
This kind of binding methodThe biggest advantage is: there is no need to wind the pipeline several times, whether you wind it 10 times or 20 times, it will not have any impact on the length of the sub-line; there is no need to cut the fishing line into many sections in advance, which is easy to mess up, we directly Coil the thread, tie it and cut it with scissors one at a time.
But there are two points to note:
1. The fishing line must not be pulled, and the tightness must be uniform.
2. The different states of the fishing line on the hook tying device will affect the length of the sub-line, as shown in the following two pictures:
It is recommended that the first state is the best choice.
In addition, I would like to share a little tip with you: add two space beans to each sub-line, It can effectively reduce the entanglement of sub-wires.
Look, isn’t this angle perfect?
Look at the fishhook I tied myself, I am quite satisfied. Of course, if you have obsessive-compulsive disorder and care about the 1 mm error, please avoid it.
2. Make all kinds of poles.
Making materials:
Various small pieces of wood, jade, glass, foam, sandpaper, saw blades, etc.
1. Draw a circle on a wooden board (preferably colored or textured wood) and cut it off with a jig saw.< /p>
2. Use a pagoda drill bit to drill holes.
3. Polishing first Use a file, then sandpaper.
4. Cut off part of the foam used to wrap the fishing line. Use AB glue to glue it together and hollow it out.
5. Continue to sand with 800 mesh, 2000 mesh, 5000 mesh, and apply oil. In this way, a beautiful rod will be completed.
Doesn’t it feel like you are superior?
p>After completing one, I tried to use other materials to make it. For the convenience of production, cutting tools were specially purchased at night.
This thing is more difficult to do. My hands were bloody and bruised.
Why is it green? Because the green foam is used in the middle.
Unexpectedly, this thing is more and more popular I became more and more addicted, so I bought specialized machinery, wood and tools from the Internet.
Science and technology are productivity. With diamonds, not only the efficiency is doubled, but the quality is also a qualitative leap.
< img data-action="zoom" alt="Homemade fishing tackle, extremely happy" src="https://img.111diy.com/timthumb.php?src=/d/file/fujian/9591d168e5626e896f8c087c2910586e.jpeg" />
Look at this appearance, it is really awesome Klass!
< /p>
< /p>
Actually, it sounds simple. It took me several days to work on the above items, and my hands were all chapped. There are several holes in it.
Make your own fishing tackle, so happy!
I hope everyone can provide more valuable opinions.