This is an exotic-style beaded bracelet. We can design the style we like according to our own preferences, and then hand-make it according to the weaving method of this bracelet.
Tools/Materials: A number of beads in 3 colors, 3 wax ropes, 1 black fishing line, a button, an embroidery needle
Methods/Steps:
1. Design yourself The style you like, and then describe it with a drawing (this drawing is not the one we made today), as shown in the picture:
2. Start making, first put 2 wax threads through the buttons, as shown in the picture:
3. Then fix the buttons and wax rope on the workbench:
4. Use another wax rope to make two flat knots on the fixed wax rope
5. At this time, the wax rope on the workbench should have 6 sections. We can divide the wax rope into two parts on the left and right, with three sections in each part
6. Then we make three flat knots on each side
7. Then pass the black fishing line through the leftmost wax rope with an embroidery needle
8. According to the drawing, we use an embroidery needle to string 5 beads, pass them under the wax rope, and arrange them according to the principle of one bead in each gap:
9. Use an embroidery needle to pass through each bead from the top of the wax rope
10. After finishing the stringed beads, string 5 more beads. The following steps will not be repeated as above
11. After all the beads are numbered, the final result is like this
12. From now on, enter the ending part. The ending part is similar to the beginning. First make 3 flat knots on the left and right sides
13. After doing it, thenMake two large flat knots with the four wax ropes in the middle
14. After adjusting, make a dead knot with 6 sections of wax rope
15. Finally add the pendant, trim the corners and you’re good to go!
The bracelet DIY is completed.
