Although now Its winter, but this cloth
handmade large-brimmed hat detailed method illustrated tutorial is also available Give you inspiration for making handmade
hat. In fact, you can knit a hat and wear it no matter it is winter or summer.
Making summer big-brimmed hats (including cutting pictures)
Tools and materials needed to make handmade DIY summer big-brimmed hats:
Cotton cloth, scissors, needle and thread, sewing machine, eraser pen, ruler , pins, elastic bands
Illustration of the production steps of handmade DIY summer big-brimmed hat:
Step 1 of making handmade DIY summer big-brimmed hat:
Cropped image
Step 2 of making handmade DIY summer big-brimmed hat:
Cut the fabric according to the paper pattern
Step 3 of making handmade DIY summer big-brimmed hat:
Put the plastic The board and lining are sewn together, and the brim is ironed and lined
Step 4 of making a handmade DIY summer big-brimmed hat:
Brim of the hat Cut the lining at the dots, then gather and sew to help form some curvature on the brim. Then fold the extra lining in and sew it back to the plastic board again.
Step 5 of making handmade DIY summer big-brimmed hat:
The front sides of the table fabrics are facing each other and stitched
Step 6 of making hand-made DIY summer big-brimmed hat:
Trimming seams portion, leaving about 3 mm
Step 7 of making handmade DIY summer big-brimmed hat:
Brim table Turn the cloth over, put in the plastic plate sewn with the lining, and arrange it.
Step 8 of making handmade DIY summer big-brimmed hat:
Sew a circle of topstitching one centimeter from the edge of the hat brim.
Step 9 of making a hand-made DIY summer big-brimmed hat:
You can continue You may or may not walk many open lines, depending on your personal preference.
Step 10 of making handmade DIY summer big-brimmed hat:
Hat body Sew one side with the front facing each other and trim the seam allowance.
Step 11 of making handmade DIY summer big-brimmed hat:
Hat body Turn it over and iron it.
Handmade DIY summer big-brimmed hatMaking step 12:
Take one Cut the elastic band loosely to a width of less than 3 cm. The length is determined based on the length of the hat body and head circumference. The length of the hat body and the length of the elastic band should not be exactly the same as the head circumference. Leave a certain amount of looseness to prevent the hat from being too tight or unable to be worn at all. Also remember to leave at least one centimeter of seam allowance on both sides.
Step 13 of making DIY summer big-brimmed hat:
The surface is relatively After stitching, the width after stitching should be wider than the elastic width.
