Belt weaving handmade belt weaving method DIY illustrated tutorial

Belt weaving handmade belt weaving method DIY illustrated tutorial

What Paper Art Network shares with you today is a very practical and personalized handmade belt weaving illustrated tutorial. Except for the metal waistband of one section of the belt, which needs the help of ready-made products, the rest are all purely handwoven by ourselves. I think. I feel a sense of accomplishment when I think about it. The important thing is that you can choose the design according to the color of the braided rope you like. It is not difficult to DIY a versatile and classic black wide belt for yourself by following the belt braiding diagram tutorial. If you have the energy and ideas, Use braided ropes of different colors to create decorative belts for your different styles of clothes that are individual and flamboyant without any sense of contradiction. It is definitely a redefinition and interpretation of taste and fashion. No, try it now.



You only need to prepare two types of handmade belt weaving materials, a metal waistband and a thick nylon braided rope as long as possible. Today’s belt weaving illustration tutorial shows the effect of gray thick rope braiding. If If you only have thin ropes on hand and want to knit a wide belt, then it is recommended to repeat steps two and three in the knitting diagram tutorial one or more times, so that you can widen the width of the entire belt. Overall, it is a lot The knitting action is repeated. As long as the position is not correct and the tightness is consistent, the final molding effect will easily be outstanding.



Step 1: Fix the prepared braided belt rope and a section of metal waistband, and fix it with a slip knot sleeve. Be careful to separate the metal waistbands loose pin buckle.

Step 2: Use the other two braided ropes to use the slipknot set fixed in the previous step as the middle boundary, and pass them through the metal waistband on the left and right sides.

Step 3: After the braided ropes on the left and right sides are smoothed, twist each other outward to form a tangled knot, corresponding to the left and right braided ropes passing through the slipknot sleeve.

Step 4: Gently untie the outer rope that passes through the left and right braided ropes of the slipknot set, and tighten it to create a handmade belt braided texture as shown in the picture.

Step 5: At first glance, this step of the belt weaving picture tutorial seems quite complicated. After a few careful observations, you will understand that the following steps are still the same.In the old slip knot wrapping method, the first fixed slip knot in the middle does not move, and the range is not defined. (Facing the left and right in the picture) The one on the left is pressed inward over the outer braided rope and then again Pass it out from below, and pass through the outermost braided belt rope on the right while being pressed under the rope; correspondingly, pass the braided rope on the right through the inner one and then press it up to be pressed up. The two braided ropes of the first fixed slipknot are pushed out until they are pressed against the outermost rope on the left;

Step 6: Repeat step 4 and tighten slowly and firmly. Just repeat the above steps later.