A long time ago, I once saw a very unique ring on my friend’s hand. It didn’t look like it was bought from outside. After asking about it, I found out that it was indeed a DIY ring made by my friend. It looked very unique. Since then, I have slowly been paying attention to various handmade DIY rings. The heart-shaped braided ring we made here is also very unique in shape. It is very romantic as a Valentines Day gift.
Main material: wire, beads, Tools required: pliers, Production steps:
Step 1: The beads we prepare here should not be too big. The hole in the middle naturally needs to be able to be strung smoothly on the metal wire
Step 2: String the beads onto the wire
Step 3: Then fold the metal wires on both sides with the bead as the center
Step 4: When folding, you need to hold the beads with your fingers to prevent the beads from moving and to make the metal wire have a loop in the folded position
Step 5: The folded position will be very rounded
Step 6: Pull the metal wire crosswise to both sides
Step 7: Pull it apart like this
Step 8: Use pliers to clamp the intersection
Step 9: This will fix it a little
Step 10: Then continue to bend the metal wires on both sides
Step 11: Do this for the best
Step 12: A heart shape appears on both sides
Step 13: Use pliers to continue clamping the intersection
Step 14: Next, use pliers to adjust the metal wire to a horizontal position
Step 15: Slowly make the folded corners