Materials required: red No. 7 wire, Tibetan silver six-character mantra bucket beads, green strands
Tools required: scissors, lighter
1. Fold the red No. 7 line in half
2. Take out the green strands for winding
3. Leave a distance for the red No. 7 wire to pass through the button knot. The green strand begins to wind, and the thread ends are hidden inside. Pay attention to winding evenly
4. Wrap out a certain length (make sure how long to wrap before doing it)
5. When it is close to the length to be wound, take out a small section of green strands prepared in advance, fold it in half and place it at the position where you need to continue winding< /p>
6. Continue winding, and the folded strands are wrapped in the winding
7. After bypassing the required length, the wire will be woundThread the end of the thread through the loop, and then tighten the small section of strand
8. This is what it looks like after tightening
9. Cut the 3 thread ends and burn them so that the thread ends will not come apart easily
10. Make a button knot and adjust the position as shown in the picture (we have detailed tutorials on button knot tutorials on our forum, please find them yourself)
11. Wear Tibetan silver six-character mantra bucket beads
Repeat the previous steps to make it look like the picture. Finally, make a button knot, cut the thread and burn it with a lighter, and you're done. (Be patient when braiding button knots)
Compile a piece of luck for yourself and wish you success in your work
