Winter is here, hot water is one of the most important winter necessities, but everyone has a little trouble: hot water gets cold after being left for a while in winter. Today, the fabric art tutorial of the production department will teach you how to DIY a fabric thermos cup cover. This handmade thermos cup cover tutorial is very simple. It can be easily completed in just 6 simple steps. Let’s learn together.
DIY fabric thermos cup cover tutorial:
Step 1: Find an ordinary-sized mineral water bottle as a template, measure the height and the side area of ??the bottle. You don’t need to reserve the height, but you should reserve about 2cm for the length and width of the side area of ??the fabric. After measuring the size Cut out the floral sandwich cotton fabric.
Step 2: Use the bottom of the mineral water bottle as a template, and cut out a circular piece of fabric 2cm longer than the radius of the template from the rag as the bottom of the water bottle cover.
Step 3: Find a piece of green plaid pure cotton fabric that is the same length as the floral quilted fabric, fold it on the front of the floral quilted fabric, sew a line 0.5 cm away from the long sides of the two fabrics, and stitch the green fabric with the seam Fold the crease upwards, turn the two fabrics over, sew another line on the wrong side of the sandwich cotton fabric, then fold the long edge inward 2cm away from the wiring, fix the fold with a pin, and sew one line, making sure to keep the position of the ribbon.
Step 4: Sew a line on each of the two short sides of the quilted fabric to secure the edge. Flip the fabric over to give the green cotton andAdd a seam at the middle connecting line of the quilted cloth to strengthen the bearing capacity of the kettle cover. Then turn the body fabric face down, align the two short sides and sew three lines of reinforcement. Remember not to sew the ribbon entrance of the green cotton fabric.
diyju.com< /p>
Step 5: Fix the round fabric with a pin according to the mark, sew it into a cylindrical shape without an upper bottom surface, and then sew it with the long side of the green cotton fabric that is not connected. Pay attention to the wrong side of the body fabric and the circle. Sew the wrong side of the fabric, after sewing.
Step 6: Turn the fabric inside out and hide the threads and stitches out of sight. Use a paper clip to thread the prepared ribbon through one side of the ribbon, and insert it from the reserved entrance to the reserved shrink opening. Threading the needle goes more smoothly with the help of a paper clip.
Okay, finally put the thermos cup in, retract the opening, tie a bow, and the DIY fabric thermos cup cover is completed,
Cup cover
How to DIY a fabric cup cover. Illustrated tutorial on hand-making a fabric cup cover
How to DIY a thermos cup cover and how to make a fabric cup cover
