iPad protective case refurbishment tutorial teaches you how to refurbish and make a satisfactory iPa

How to manually refurbish an iPad protective case bought in the market? Let’s follow the production department editor to learn the "iPad Protective Case Refurbishment Tutorial". Teach you how to make a satisfactory iPad protective case by hand.

Tutorial on renovating iPad protective case

1. This is a small nylon zipper bag that is about the same size as an iPad protective case.
   
2. This is a B5 size soft material iPad protective case. I will resize and sew it into the inside of said bag.
   
3. Choose two bags of approximately the same size.
   
4. For reference, this is what it would look like if you put an [ipad 2] on this B5 size.
   
5. Turn the soft bag over to the back and remove the zipper and label.
   
6. Seam from the front to reduce the widthAbout 1 cm smaller. Soft bags have thickness so it goes inside, so its easier to make them smaller.
   (1) Sew an inner seam edge 1 cm away from the original seam line (white line). If you want to sew a stylus cover, fold a flat strip of fabric with a width of 25 mm in half and sew them together (white dashed line).
   (2) At the same time, sew the opposite bag opening (yellow line).
   (3) Finally, cut off the extra gap allowance again to about 1 cm (red).
   
7. As shown below, the stylus cover can be made in this way.
   
8. Place the soft bag in the nylon bag and place it at the bottom.
   
9. Fold the edge of the soft bag inward, about 1mm below the edge of the zipper.
   
10. The effect is shown in the picture below.
    
11. Carefully sew along the edge.
    
12. Suture lineDo not hinder the opening and closing of the zipper.
    
13. The sewing is complete.
    
14. Ipad 2 comes with a commercially available cover (red). The stylus (white) will come next to it.
    
15. Since the stylus is stored securely at one end, it is easy to find and convenient.
    
16. Power cords and other items can also be placed in the outer zipper of the nylon bag. Have you learned the tutorial on renovating the iPad protective case? Follow the same method to renovate and make an iPad protective case that you are satisfied with.
    

Extended reading:

1. Homemade white cotton mask hand-making tutorial

2. A good place to store needlework and thread. Handmade diy creative needlework storage

3. Turn disposable paper cups into treasures and DIY small fabric flower pots

4. How to make a fabric fan cover by handmade fan dust cover

5. Fabric handmade baby shoes tutorial teaches you how to make baby toddler shoes