Steps to make baby hair ties How to make baby hair ties

Do you have a child or are about to have a child? Is anyone near you expecting a baby? If the surprise in your life is about to come, you can make her a stylish and sweet headband, thus successfully starting her fashionable path. This article will teach you how to make beautiful headbands for babies and toddlers that are completely customizable to your specific needs and style.

Steps to make baby headbands. This DIY tutorial includes: measurement and preparation, sewing headbands, and decorating headbands. If you want to learn how to make baby headbands, check out the production system. Let’s learn the steps to make a baby headband!

Measurement and preparation

1Measure the head. Before making a headband, you must know the correct size. You can measure specifically, or roughly based on age and weight. If you want to measure specifically, you should measure the circumference of the headband where it is tied. Usually above the ears.
- Choose a good method. Babies are generally active and don't like to stay still, so measuring them is a challenging task. Use a cloth ruler if you have one. Don't use metal rulers as they are inaccurate and can easily scratch your baby. If you don't have a cloth ruler, use a soft cord to measure, then place the cord on another measuring tool to compare the length.
- If the baby is not around or the baby has not been born yet, a rough measurement is needed. This is easy to find online. Look for standard sizes on sewing craft websites and message boards. Its easy to find other babies of similar size or age and measure their head circumference.
2Determine the size. You have to decide on the width of the headband. This mainly depends on the size of the baby who is wearing the headband, as if it is too wide it will not fit the head and can easily slip off. It is generally not suitable for newborns to wear headbands longer than one centimeter. Half a year old toOne-year-old babies can wear headbands two to three centimeters wide. Toddlers starting as toddlers can wear headbands five centimeters wide.
- You may want to test it before making a decision. You can cut off scraps of fabric to try on and visually check whether the width is suitable, or let your baby wear a store-bought headband first to find the right size.
3Select materials. The material of the headband mainly depends on the type of headband you want to make. Because babys skin is soft and fragile, soft and elastic materials are best. Jersey, velvet or similar fabrics are suitable for baby headbands. These materials should be made of the headband itself. There are more options for decorations because those items are less likely to sit close to the babys head.
4Cutting material. Once you have selected your material, you need to cut it. Twice the amount of jersey will be needed to form a tube. If you choose to use a fabric like stretch lace, you don’t need to double the amount.
- Whether it is jersey, velvet or other baby fabrics, it needs to be cut into a long rectangle in order to finally make it into a tube shape. First, cut to length (using the previous head measurements) to leave a four centimeter seam allowance on each side. Cut twice the width of the size you decided on, also leaving a 4cm seam allowance. These seam allowances should be on each side.
- Use appropriate tools. When you're cutting fabric, its important to use a sewing machine, as dull blades can create irregular and unsightly edges.
5Cut the rubber band. Cut a piece of rubber band that is as long as the measurement of your babys head. Don't shorten it to make it longerto increase the tension, because there will be a section that overlaps the seam, and you definitely want to stretch it as much as possible. To maintain a certain amount of pull and tension, the babys headband needs to be longer and the headband must not be too tight.

Sewing hair ties

1Made into a cloth tube. Now you have to make the fabric tube. This fabric tube contains the bulk of the headband. It covers the head and decorations are added to it. As good as it gets, its made from stretch fabric so most wrinkles and imperfections are naturally hidden.
- Fold the fabric into a rectangle. If you choose stretch lace fabric, this step is not necessary. If using another material, fold it lengthwise so that the raw edges face out.
- Pin the fabric with straight pins so that the long edges are in a straight line. Straight pins should be placed vertically on the long edge of the fabric. This will prevent the sewing machine from catching the pin if you forget to remove it. You can also sew better if you follow the pins.
- Sew the long side of the fabric, leaving a seam allowance of four centimeters, and leave both ends unsewed. Use the appropriate needle or sewing machine needle depending on the material you choose. Stretch fabrics require round and herringbone stitches. For cotton, ordinary needles and straight stitches will suffice. The same stitching can be done by hand, but it will take more time.
- Turn the fabric inside out. This can be done by hand, but its easier to do with basic tools. The most common method is to use a small safety pin. Attach one end of the pin to the pot and the other end to the fabric tube. Drape the fabric over the pin bit by bit and slowly push the needle down. Its time consuming, but simple. You may want to iron it after you're done to make it look better. Or maybe you don't want to iron it to make it look looser and wrinkled.
2Add rubber bands. Elastic bands allow the headband to fit gently over your babys head without having to tie, knot, or button it. And this way your baby can use it when he grows up and wear it for a long time.a little. Make sure you have enough rubber bands, as straps that are too tight are not good for your baby.
- Put the rubber band into the tube. If you put a safety pin on one end of the rubber band, it will guide you through the tube easily. Make sure the rubber band stays straight as you thread it through the tube.
- Sew the ends of the rubber band together by hand or using a sewing machine. A zigzag or X-shaped stitch will look better. Make sure the rubber band is flat and not bent inside the fabric tube.
- Sew the cloth tube. Although you can use a machine, hand stitching is best. Roll the fabric as far inward as possible. Carefully sew the ends shut with a small whip stitch. If you don't want to sew by hand, you can sew by machine, overlapping the fabric and sewing down. This will give you a clearer view than hand stitching. After the tube is sewn, the headband is finished!

Decorative headband

1Make a bow. After the headband is ready, you will want to add some decorations to make it look better. Bows are a classic look for little girls and are so easy to make. This can be a great place to get creative with your baby headband.
- Ribbon is needed to make a bow. Use textile ribbon as plastic ribbon doesn't work as well. Choose a ribbon that suits your taste and that matches the color of the hair tie you just made.
- There are various kinds of bows. You can make a simple bow, like one would tie a shoelace, or you could make a more complicated bow, like one you would tie on a gift. If you are making a normal bow, tie it as usual first. Then wrap three to six centimeters of ribbon around the middle of the bow to hide the middle knot.
- To make a more complex bow, roll up the ribbon. Bring both ends downward, wrap about five centimeters and press. Do the same on the other side. Keep repeating this until the knot looks full. Secure it with a pin and cover the middle as before. Finally glue or sew the knot to the headband.
2Make flowers. You may want the headband to have more patterns. This will make the little girl look nice and look like an angel. You can Use one flower, or you can sew many flowers together. You can use realistic handmade flowers, glue them together, or make your own from cloth.
- Prepare a piece of fabric that is thirty centimeters long and one centimeter wide. Use a variety of fabrics that complement each other on your strips. Any kind of fabric will do, including basic cotton.
- Adhere this fabric to the pipe purl in a pleated pattern. This can make the fabric look wrinkled.
- Wrap the pipe purl into a rose shape. Its easier to glue it to the headband if you only make one. Otherwise, glue the flowers to the felt one by one. Trim the felt so its hidden under the flower and glue it to the headband.
3Use sequins. For a better look, you can use sequins. Because this is easy to use and doesn't require you to do anything extra. They come in a variety of colors and sizes and can be tied to headbands to create different patterns. Try using the same color in different sizes to create different looks.
- The sequins can be sewn individually to the headband through the hole in the center, but they can also be glued to the headband. Decide which method to use based on your own abilities and your aesthetics. Its best to try it on a rag first.
4Add other shaped items. You can add various other shapes to your headband. This can be handmade by yourself or purchased from a craft store. This can make your baby girl look very personal. The shape chosen will tell others about her uniqueness. Stars, hearts, animals or food are all great elements to put on headbands.
- You can make these shapes yourself using felt. You can simply create these by cutting one or more out of felt and gluing them to a headband, or you can use feltMake some three-dimensional objects from the cloth and stick them to the hairband. It depends on your capabilities and requirements.
- You can also decorate the headband with novelty buttons or scraps. And glue or sew them to the hairband.

Warning

Make sure the headband doesn't slip down and wrap around your babys throat.
Babies like to put things in their mouths. Make sure any trinkets you attach to the headband don't come loose.
Do not tie the headband to your babys head if it is too tight.
Babys head should rest for a while after the headband is removed. Hair ties, clips and other accessories should be worn after an hour or so.