Elegant bow made into bow bookmark

Simple Bow Bookmark Tutorial

Main material: ribbon, Tools required: Scissors, toothpicks, 101 glue, Production steps:

Step 1: First prepare a piece of ribbon 2 cm wide and 7 cm long (approximately).

Step 2: Dip a toothpick in glue and apply it to the right end of the ribbon. (Note: Do not exceed the range of 2*2 cm. Apply glue evenly, not too much, otherwise it will penetrate the ribbon.)

Step 3: Roughly divide it into three equal parts, expose one third of the ribbon, and then fold off the glue-smeared ribbon.

Step 4: Apply the glue on the toothpick to the left end of the ribbon (no more than 2*2 cm distance). Gently press on top of the folded third of the ribbon.

Step 5: Above.

Step 6: Press the ribbon with your hands to form a bow shape. (Note: Only the folded part is needed, do not press both ends)

Step 7: Apply glue on top of the crease.

Step 8: Press.

Step 9: Put the bow aside first. Prepare another piece of ribbon that is 2 cm wide and (approximately) 4 cm long. (I used such a long ribbon, you can use it as you like.)

Step 10: Fold it up and down so that there is a crease. (Method guide: Fold everything like origami)

Step 11: Apply glue evenly on the crease, then fold.

Step 12: Apply glue to the center part of the folded ribbon.

Step 13: Glue on the center part of the bow.

Step 14: Press. Wait for the glue to dry. Then the bottom part (the part sandwiched by the book) may be a little messy, so cut off the messy part after the glue dries.