I believe you all You must like the pillow above. This is a Corgi plush pillow. If you also like it, sew a pillow by yourself and experience the quiet warmth.
Tools and materials needed to make Corgi plush pillow:
Red-brown short velvet, 1 piece of fabric on the back of the head, 2 pieces of face, 2 pieces of body, 4 pieces of ears, white short velvet Down, 1 piece for the lower part of the face, 1 piece for the upper part of the face, 2 pieces for the nose, 2 pieces for the ear sockets, one spool of white thread, one spool of black thread (including a needle), a pair of 16mm mushroom head eyes (including back buttons) , One 7*9mm nose (including back button),
Illustration of the production steps of Corgi plush pillow:
1. After getting the material package, please check the material package list
Take a piece of face cloth shown in Figure 1, fold the two sides of the piece together, make sure the long side is at the top, and then take the white face cloth shown in Figure 3 piece, align one side of the white fabric piece with the long side of the khaki side fabric piece from the opposite side as shown in Figure 4, and sew along the dotted line as shown in Figure 4. Leave about 3mm at the vertex where the two sides intersect without sewing.
Take another For a piece of reddish-brown face cloth, align the long side of the cloth piece with the remaining side of the white cloth piece from the opposite side. Backstitch along the dotted line shown in Figure 2. Also leave about 3mm at the vertex where the two sides intersect without sewing.
Take the leftovers For the face cloth piece with forks below, align one side of the white face cloth piece with the remaining side of one of the red-brown face cloth pieces from the opposite side, and sew the backstitch along the dotted line shown in Figure 2
Finally, align the remaining two sides from the reverse side and sew them along the dotted line shown in Figure 1
Face The stitching result is shown in Figure 1. Then align the two sides of one of the bottom forks from the opposite side and sew along the dotted line shown in Figure 2.
7. Sew the other two forks in the same way.
8. Use the same method to sew the three forks on the back of the head. Align the face fabric and the back of the head from the opposite sides. Sew the backstitch along the dotted line shown in Figure 2. There is no need to sew where the back opening is left on the side. The bottom two of the pieceThere is no need to sew where the side forks connect to the body.
9. Take two pieces of body fabric, align them from the opposite side, and sew them along the dotted line shown in Figure 1. There is no need to sew the top of the body. After sewing, turn it back to the front.
10. Insert the sewn body into the opening at the bottom of the head as shown in Figure 1, so that the perimeter of the opening at the bottom of the head aligns with the perimeter of the opening at the top of the body.
11. Back stitch to sew the head and body together
12. Turn back to the front from the back
