In the summer, babies' feet tend to sweat, and cotton or woolen shoes cannot be worn. However, childrens soles are also afraid of getting cold, so they still need to wear shoes. Let me share two ways to make cattail shoes (sometimes called bean dregs cake shoes). The upper is made of a single layer of pure cotton and a piece of cloth. It is easy to cut. It has a double-layer sole to absorb sweat and keep warm.
First upload the finished product picture:
1. Cut the upper (including the sole) into 2 pieces.
2. The insole of the shoe is double-layered.
3. Car heel back seam.
4. Split the seams and iron them (with a small strip of adhesive lining).
5. Reinforce the back seam and seam the sole (heel part).
6. The inner bottom of the car.
7. Add elastic bands.
8. Turn on the elastic band, the first line (in the direction of the shoe, to the right of the elastic band).
9. Carry the elastic band, the second line (in the direction of the shoe, to the left of the elastic band).
The front view.
10. Pull up the Yanbian in front.
11. Draw and sew.
12. Add decorations, success!
Second style:
After making the first one, I felt that the elastic edge on the shoe mouth was a little twisted, and I was worried that it would be difficult to wear, so I improved it. There is no elastic band installed on the shoe collar, and an air eye loop is machine-locked at the appropriate position of the shoe collar.
Set size 6MM.
Then punch a hole in the center of the air hole, and then turn the shoe mouth around.
Look at the position of the air eye. Others are the same as the first style.
Nail up the decorations.
Thread the shoelaces along the mouth of the shoe from one side of the air hole, and then through the other air hole, and the shoelaces are ready.
A simple drawing of the shoe pattern and dimensions are as follows:
See if it is easy to do? If you have a baby, let’s do it together!
