Soft and comfortable cotton slippers and shoe covers are handmade, easy to carry when traveling, and finally you can wear comfortable home slippers in the hotel. It is a very practical handmade fabric art. For specific DIY methods, please refer to the graphic tutorial below. .
Slippers DIY materials:
Red cloth 30×110 cm, off-white plain cloth 30×110 cm, sole cloth 30×30 cm (harder or wear-resistant synthetic leather), pink piping strips, and cotton paving;
Shoe cover DIY materials:
Red cloth 30×30 cm, small pink floral cloth 30×110 cm, lining 30×30 cm, zipper 20 cm, cotton paving, small decorative blue buttons with a diameter of 0.6 cm, decorative light green satin ribbon 45cm
Steps to DIY slippers:
1) There are three layers of soles, surface fabric + cotton paving + sole fabric, overlap them together, and sew around them to fix (0.2 cm seam allowance);
2) Three layers of upper, surface fabric + cotton padding + lining fabric, overlap them together, and baste and press seam 2.5 cm around the edges;
3) A 10cm shrinkage seam on the front of the vamp, and a pink piping strip on the bottom;
4) Stack the sole + upper, sew and fix it, and sew pink piping strips around it to complete the production of slippers.
DIY steps for shoe covers:
1) The shoe cover surface fabric is composed of three pieces of fabric a, b, and c, as shown in the figure. First make cloth A. Cloth A is made up of 4 pieces of red triangle cloth and 5 pieces of pink triangle cloth. When splicing, be sure to leave the seam allowance on the reverse side.
2) After the a cloth is completed, it is spliced ??together with the b cloth and c cloth to form the surface cloth. The three layers of surface cloth + cotton paving + lining cloth are basted to become the main cloth of the shoe cover, and then the pattern is sewn on the main cloth. , as shown by the dotted line in the figure.
3) The back of the main fabric faces outward, fold it in half, sew the joints together with a zipper, then sew both sides of the theme fabric, and trim away excess cotton core and raw edges.
4) Turn the main fabric back to the front from the zipper to complete the shoe cover making.
