Non-woven DIY childrens bubble skirt, the skirt fabric has beautiful flower patterns, uses an elastic waistband, and does not require zippers and buttons. It is comfortable and beautiful for little girls to wear. For specific DIY methods for children’s bubble skirts, please refer to the illustrated tutorial below.
Clothing DIY materials: It is composed of floral cotton surface fabric, plain lining and elastic band.
Clothing DIY steps:
1) Measure the childs figure, and then cut the fabric, 2 pieces of surface fabric, 2 pieces of lining, and 2 pieces of waistband. Usually the length of the outer fabric of the skirt is 4 cm longer than the lining, and the width is about twice the length of the waistband. In addition, the width of the waistband can be cut to about 8 cm.
2) Sew the left and right edges of the surface fabric, lining, and waistband together, leaving a 1 cm seam allowance.
3) Sew the bottom of the skirt. Place the lining inside the fabric, with the front sides facing each other, and sew the bottom edge, leaving a 1cm seam allowance.
4) Sew the skirt opening. With the backs of the top fabric and lining facing each other, sew the skirt opening, leaving a 0.7cm seam allowance.
5) Sew on the waistband. Fold the waistband fabric 1 cm inward, then fold it in half, iron it flat, and then sew it together with the skirt hem.
6) Install the elastic band. Use a hairpin to insert the elastic band through the waist opening into the small hole, and wrap it around in a circle. The length of the elastic band isChildrens clothing shall be comfortable. Finally, use needle and thread to close the waistband opening. In this way, the childrens bubble skirt is completed.
