Practical clothing DIY tips - how to sew concealed buttons. Concealed buttons are composed of a male button (convex surface) and a female button (concave surface). The male button is sewn at the appropriate position on the upper edge of the opening of the clothing, and the female button is sewn at the opposite lower overlap. When sewing concealed buttons, sew the male button first, then press a mark on the overlapping area below, and then sew the female button around the mark, so that the male and female buttons will not be out of position. Troubled.
1) Pick a needle on the surface of the clothing material and pull the suture to pull the starting knot into the middle layer of the clothing material;
2) The suture passes through the male buttonhole;
3) The sewing needle is inserted into the fabric along the edge of the buttonhole, then passed through the buttonhole, and the thread is wound under the needle;
4) After pulling out the needle thread, there is a knot-like knot left on the edge of the buttonhole;
5) Repeat steps 3 and 4, continue to cut the sutures, and sew all the buttonholes in sequence;
6) Pass the needle through the back of the fabric and tie a seam-stop knot;
7) Place the needle at the seam stop, then remove the needle from the side slightly far away, pull the suture, and pull the seam stop into the fabric sandwich;
8) The male button suture is completed;
9) The female button is also sewn in the same way.
