Some friends want a tutorial on Origami tanks, here I will learn Learn how to make an origami tank and share it with everyone. We can see that the shape of this tank is very similar to the tanks we often see. However, the final reshaping failed. Xiao Qijun’s hands are quite clumsy, but it is still a very vivid tank origami. Let’s try it out. Give it a try!
First, take 2 pieces of A4 paper. You can also use newspapers of the same size. The tank will not be affected. Beautiful. Prepare a utility knife and ruler, and don’t forget to teach the children to wash their hands when doing it~
1. FirstUse a piece of A4 paper and cut it into a square shape. Don’t throw away the remaining part, which will be used to make the barrel later.
2. Make a crease in the middle, then 1 and 2 in Figure 3 The creases coincide with the 0 crease respectively, forming two red creases in the middle.
3. Figure 4 above shows that the creases 1 and 2 in Figure 3 coincide with 0 After style.
4. Fold in half from the middle to form Figure 1 above.
5. After unfolding, fold both sides in half toward the middle crease, as shown in Figure 2 above Mark the red line.
6. After folding into the middle, bring the parts on both sides to the middle Fold, as shown in the red line marked in Figure 3 above, into the style of Figure 4.
< img src="https://img.111diy.com/timthumb.php?src=/d/file/fujian/0576da530314faed83d35c241f9248c6.jpeg" style="" title="Origami Tank 04.jpeg"/>
7. Fold the outer edge in half in the middle to form the look of Figure 1 above, so that the lower half of the tank is done Okay, then start making the gun mount.
8. Take another piece of A4 paper (Picture 2) and cut it vertically from the middle Open to get Figure 3 above, then cross-fold to get the crease, as Figure 4.
9. Please be sure to read this step! Please be sure to read this step! Please be sure to read this step! From now on, the red line is the new crease, and the blue line is the mark that has been folded.
10. All the creases in Figure 1 above have been folded. They are all symmetrical marks, which are easier to fold. They are usually folded in half from the middle. Except for the rice-shaped shape, the four red lines in Figure 2 are three-point creases. , here you can mark it with a ruler and it will be folded. The rest of the creases are relatively simple.
11. As shown in Figure 2 above, turn over Figure 1 and fold it in half along the red line in Figure 2 to form Figure 3. Turn it over again to get Figure 4.
12. Fold along the position marked by the red line in Figure 1 above, and fold it as shown in Figure 4.
13. Follow the red line marked in Figure 4 above, and fold the part marked by the red line upward. As shown in Figure 1.
14. Fold the four parts in the same way, and then turn it over. As shown in Figure 3.
15. Along the red crease in Figure 3 above, fold the two sides to make marks, as shown in Figure 4. You can look at the drawn lines for comparison.
16. After getting the shape, turn it over Come over, as shown in Figure 1 above, mark along the red line, and fold downward. Then insert it into the other side, as shown in Figure 2.
17. Drill a small hole in the gun mount for inserting the gun barrel, as shown in Figure 4.
18. Insert the prepared gun barrel into the drilled hole, and then sit the gun mount on the lower half of the previously prepared chassis, so that it can be stuck on both sides. Hold the gun mount, but it is best to use glue to stick the gun mount and chassis.
Side view
Finally, organize the chassis to form crawler tracks. The photo taken here is relatively dark, and the phone is a bit shabby! ! But you can still see clearly! Generally speaking, it is not difficult to fold, but the crease in the middle is a bit complicated and can easily confuse people. So when you fold it, just follow the order and remember where the middle crease is, and you can do it quickly. .
For friends who like military equipment, you can try this origami tank. It is very good and very vivid. Both children and adults can make it. Finally, I wish you all the best. Finished early!
