Handmade National Day flag
Materials: Wood squares, wood chips, round wooden sticks, white latex, iron wire, plastic buckles, flags.
Production Steps
Step 1:Paste the board and wooden square together as shown.
The second step: Then put the circle A shaped flag base is pasted in the middle of the board.
The third step: Use glue to The stick is glued to the small hole in the middle of the log.
Step 4: Use plastic to draw A tie bar secures a square piece of wood to one side of the stick.
< span style="color:#E53333;">Step 5:Put the Z-shaped steel rod through the small hole in the wooden bar and fix it, as shown in the picture.
Step 6: Fix the other end with round plastic to prevent The steel rod fell out.
Step 7:Use an awl to poke a small hole in the plastic stick.
Eighth Steps: Fix a stainless steel rod, as shown in the picture.
Step 9:Install the plastic buckle in the appropriate position, as shown in the picture.
Step 10:Put the plastic stick on the wooden stick, as shown in the picture.
Step 11:Prepare a wooden stick.
Step 12:Put the wooden stick through one side of the prepared flag.
Step 13: Prepare The good rope is passed through the hook of the flag stick.
Step 14: Then install the rope on the fixed roller.
No. Step 15: Also fix the rope to the plastic buckle below.
Step 16:After the installation is completed, a homemade national flag is ready!
