Making deer antler headdress
Materials: Non-woven fabric, sequined gauze, needle and thread, discarded headband, slightly elastic brown fabric.
Production steps
Step 1: Have all required materials ready.
Step 2:Prepare two pieces of deer antler fabric, front Lay it flat on the table opposite the front and use a pen to draw two symmetrical antlers shapes on the back of the fabric. About 0.7cm away from the sewing line, use scissors to cut off the sewn antlers. You can make a few cuts at the arc bends, so that after the fabric is turned over, the turns will be smoother.
Step 3:Take out the needle and thread along the drawn Sew the fabric along the pattern line (keeping the two pieces of fabric facing each other).
Step 4:Put the antlers on the front and stuff them Put on cotton.
Step 5: Use fabric to compare the headband length, cut the fabric to the corresponding size.
Step 6:Place the headbands with the fabrics facing each other. Sew together.
Step 7 :Turn the headband strip to the front. The headband strip is relatively slender and difficult to turn, so you need to be patient and pull it out little by little.
Step 8:Tuck the prepared headband into the cloth.
Step 9:Sew the opening on the hairband .
Step 10: Sew the antlers just made to the headband, paying attention to left and right symmetry.
Step 11:At this time, the prototype of the antler headband has come out. Lets cut some small pieces of fabric and decorate the headband with Christmas fruits.
Tenth Step 2: Sew the fronts of the fruit discs opposite each other, turn them over to the front and stuff them with cotton (the method is the same as making antlers)
Step 14:The materials made can be changed appropriately, such as antlers Choose the fabric, put it on your head and try it on!
