Materials required: Red No. 7 wire, Tibetan silver six-character mantra bucket beads, green strand wire
Tools needed: Scissors and lighter
1. Fold the red No. 7 line in half
2. Take out the green strands for winding
3. Leave a distance for the red No. 7 wire to pass through the button knot, and start with the green strand Wrap the wire, and the thread ends are hidden inside. Pay attention to winding evenly
4 .Wrap out a certain length (make sure how long to wrap before doing it)
5. When you are close to the length to be wound, take out a short section of green strands that you have prepared in advance, fold it in half and place it where you want to continue winding
6.Continue to wind the wire, and the folded strands are wrapped in the winding wire
7 .After winding the required length, pass the winding thread end through the loop, and then tighten the small section of strand
8. It looks like this after tightening
9. Cut the 3 thread ends and burn them so that the thread ends will not come apart easily
10. Make a button knot and adjust the position as shown in the picture (we have detailed tutorials on button knot tutorials on our forum, please find it yourself)
11. Wear Tibetan silver six-character mantra bucket beads
Repeat the previous steps to make it look like the picture, and finally Make a button knot, cut the thread and burn it with a lighter, and you're done. (buttoned)Be patient)
Prepare a piece of luck for yourself and wish you success in your work
