Home > Creative handicrafts > jewelry making

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

The editor of the Production Department has brought you an illustrated tutorial on the DIY production method of this five-pointed star pendant. I hope that friends who like this pendant can follow along and try DIY~
Material list: Fish A small transparent ball with an empty ballpoint pen refill (cannot be smaller than the inner diameter of the ballpoint pen)

1. First cut the empty refill into the same length. It is recommended to cut a refill into 4-5 sections.

Cut a piece of fishing line and thread it through four empty tubes. As shown below

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

2. Place the fishing line in the center, as shown in the picture below, and place a tube bead before the line crosses to form a square

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

3. As shown in the picture, put two pipes at both ends

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

4. When the two lines cross, put a new tube bead

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

5. Repeat the previous step to make four half-squares, leaving the last tube bead unpenetrated

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

6. The last row of crosses is inside the front row of tube beads, forming a pentagon

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

7. As shown in the picture below, wear two tube beads and two thread beads at both ends of the line

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

8. After wearing it, insert a bead at the intersection

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

9. Contrary to step 7, first thread two beads on both ends of the thread, and then thread two tubes

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

10. Cross the two wires and thread them into the next row of tube beads

Illustrated tutorial on the manual DIY production method of five-pointed star pendant

11. Repeat steps 7-10 to thread all five sides. Finally, tighten the two knots at the intersection,

Cut off the excess thread and heat it with a lighter until the knots are fused together.

(Don’t make the fire too big