Isn’t it fun and interesting to make mini birdcage flower arrangements and insert them on succulent potted plants? If you are excited and want to add a little extra flavor to your home, then read on and share with you the production process of aluminum wire DIY mini birdcage flower arrangements!
【Material】
1. Aluminum wire (2.5mm): 7.5cm x 1 piece, 8.5cm x 3 pieces, 3.5cm x 2 pieces, 5cm x 1 piece, 40cm * 1 piece
2. Aluminum wire (0.8mm): 5cm x 1 piece
3. Wooden bird about 2 x 1.2cm
[Steps]
1. Bend the 7.5cm aluminum wire into a circle (you can use a marker pen to bend it into a circle), then bend the ends into a hook shape and fasten them to each other.
2. Bend two 3.5cm aluminum wires on one side into a hook shape.
3. Then fix it as shown in Figure 3 (after fixing one side, check whether the length needs to be trimmed, and then fix the other side as well), and then half-bend three 8.5cm aluminum wires , and bend the tail end into a hook shape.
4. Next, fix the 8.5cm aluminum wire on the bottom ring (divided into three equal parts) to serve as the outer frame of the birdcage.
5. Birds can be made with airplane woodTo make it, drill a hole and pass the 0.8mm aluminum wire through the body of the bird, and make a small hook at the bottom to fix it.
6. After fixing the bird on the top of the outer frame, cut off the excess aluminum wire.
7. Next, fix the outer frame with 5cm aluminum wire (2.5mm), as shown in Figure 7 and Figure 8.
Finally, wrap the 40cm aluminum wire around the center of the bottom circle and then cross it back and forth. If the birdcage shakes a little and cannot be fixed, just use pliers to clamp the bottom (as shown by the arrow).
This completes your homemade mini birdcage aluminum wire flower arrangement!
I wonder if you like this kind of flower arrangement? If you are interested, you might as well give it a try!
