Illustration of the DIY handmade production steps of using waste cardboard boxes and corrugated pape

Put the waste carton on Remove the corrugated paper and DIY a laptop cooling rack. It is not only environmentally friendly but also saves money.

Prepare materials as shown in the picture : Corrugated cardboard, utility knife, super glue

Required dimensions of parts drawing.

< /a>

Cut the corrugated cardboard as shown above.

We do it for the better To improve the support force, six support plates are used

While supporting the cardboard The lower back part is about 5CM and a 6MM fixing hole is cut.

First put the bracket together and see if there is any discrepancy

Fix it with pins If there is no problem, start pasting.

First paste the bottom and Cardboard for longitudinal support 5cm behind

Mark the positioning line

Partial view of the marked positioning line

As marked in the picture Install the angled support plate on the positioning line

Solid support plate Good installation effect

Install the upper back cardboard

Front installation diagram

Front cardboard installation

Finally, the DIY manual production steps of using waste cardboard boxes and corrugated paper to transform notebook cooling fans are completed.