As a child, did you ever long to own a boat, a small boat of your own that could be driven into the water? Is there any reason not to realize this small dream? All it takes is a few cardboard boxes, plus wide tape, and it takes half a day. Time will take care of it!
Take two large boxes of the same size, cut out a side of each box, and tape them together. Make sure to cover the seam edges with extra cardboard for added solidity.
Added an extra layer of cardboard to the bottom of the boat. Because the bottom can get very wet and carry a lot of weight, make sure its secure!
Cut off the top of the box, leaving a little edge for decoration. Notches were also cut into the sides where rowing could be done. Next, tape the entire hull with tape.
Use another color of tape (red) to spell out the name of the ship.
Also added more layers of tape (2-4) on the sides to ensure your boat doesn't get wet!
2-3 layers of cardboard were added to the interior of the boat, and at least 7 layers were added to the bottom. This is really going to be launched into the water, and it is no joke.
For safety reasons, two more layers of tape were pasted on the entire boat.
Use a color printer to print out some cool patterns, cut them out with scissors and paste them on the boat.
Finally, before going into the water, please make sure you can swim or carry a lifebuoy, safety first!~
