If you buy a large electrical appliance at home, it will always be a headache every time you deal with the packaging boxes. It’s hard to just throw it away, and it’s useless and takes up a lot of space if you keep it.
Sharing a practical craft tutorial, use waste paper boxes to make a kitchen storage cabinet, where you can put bottles and cans in categories. If you happen to want a cabinet like this, follow the illustrated steps below and give it a try!~
Materials and tools: waste paper boxes, double-sided tape, tape, PVC stickers, white latex, paper cutter, hot melt glue gun.
1. Remove the cardboard from the carton and cut out the back, sides and shelves of the locker. Use three layers on each side to make it stronger.
2. A slot should be made in the middle of the side panel so that the partition can be placed.
3. Stack several pieces of cardboard to cut out multiple partitions at once.
4. The required cardboard is basically ready.
5. Use a paper cutter to cut out the engaging grooves for the side panels and the back panel.
6. Use double-sided tape or glue to stick the back and sides together.
7. The multi-layer partitions are also glued, and a straight board is glued on the side facing the front to make it look more beautiful.
8. What it will look like after completion.
9. After gluing, you can use an iron to iron it flat.
10. Apply the sticker carefully.
11. All boards are treated in this way.
12. Use double-sided tape to stick the partition into the slot on the side panel.
13. Glue the back panel to the slot of the side panel in the same way, and stick a circle of tape around it for reinforcement.
14. Paste the self-adhesive paper on the outside, and a storage cabinet is ready. It is very practical to hang on the kitchen wall~
