Use waste cartons to make beautiful table lamps by hand. In addition to cartons, you also need to prepare external wires, lamp holders, and light bulbs. These are sold in hardware stores and building materials markets. Art comes from life, but it is higher than life. Even the little animals are cut so perfectly!
step1 Use a utility knife to cut off the folded part at the bottom of the carton, leaving the lid part, fold it and stick it with tape. On the side of the box, leave an edge of about 3cm and then dig it out. Use the pieces of paper you just dug out to fix them on the inside of the box;
Use pieces of paper to make the legs of the box and fix them with a hot melt glue gun.
step2 Cut a small opening at the bottom of the carton, pass the bulb through, and fix it with a hot melt glue gun.
step3 Buy it in the marketA few sheets of punched paper are ready for use.
step4 If you use perforated paper alone, the light may not be hazy enough, so first stick a circle of translucent paper, and then stick the perforated paper on top.
step5 The top is not sealed to facilitate heat dissipation. If the air conditioner is often turned on at home, you can seal it with a layer of perforated paper for the sake of appearance.
step6 Use black colored cardboard to cut out two animal images and paste them on the two corners of the table lamp.
step7 The beautiful and warm table lamp DIY is completed!
< /p>
