Do children often collect beverage bottles for crafts? Remember not to throw away the bottle caps. You can use them to make cute collages, or the storage baskets introduced below! Use wire and bottle caps to DIY three-dimensional storage Tutorial on the basket, you can use it to buy groceries while playing house~
Prepare a lot of plastic bottle caps, as well as wire and pliers.
The bottle caps on each side of the storage basket make up the drawing. Just string the bottle caps into the five sides as shown in the picture above, and then connect them and you are done.
1. Punch holes on the side of the bottle cap. If the holes are connected, they should form a cross.
2. A total of 63 plastic bottle caps need to be prepared, all of which must be punched.
3. Details of the bottle cap completed by punching.
4. Take a bottle cap and thread the wire through it as shown.
5. Connect five bottle caps horizontally first.
6. Wear it lengthwisebottle caps.
7. After putting on the 3*6 bottle caps, the bottom of the storage basket is completed. Bend the wire upward.
8. Use a similar method to make the side of the bottle cap.
9. The bottle cap will be very strong after being threaded with iron wire both horizontally and vertically.
10. Production process.
11. Twist the wires at the joints together and cut off the excess.
12. The basket part is basically completed.
13. Bend the excess wire downward.
14. Fold inward to the inside of the bottle cap to avoid hurting your hands.
15. Finally, use wire to make a handle, and the cute environmentally friendly storage basket DIY is completed!~
